Professional manufacturer of vertical & horizontal wind turbine generator, PMG generator
 info@engelec.cn 
Home » Power Inverters » Off-grid Inverters » Single Phase » EEDNB 10KW Off-Grid Power Frequency Inverter Single phase
Share to:

EEDNB 10KW Off-Grid Power Frequency Inverter Single phase

EEDNB 10KW Off-grid Power Frequency Pure Sine Wave Inverter Off-grid, use complete isolation-type inverter technology, noiseless output. Adoption of advanced SPWM technology, pure sine wave output.Dynamic current loop control technology to ensure inverter reliable operation. EEDNB 10KW Wide DC input voltage range.

EEDNB 10KW Off-Grid Power Frequency Inverter Single phase


Off-grid Connection


Features

◆  Complete isolation-type inverter technology, noiseless output.

◆  Adoption of advanced SPWM technology, pure sine wave output.

◆  Dynamic current loop control technology to ensure inverter reliable operation.

◆  Wide DC input voltage range.

◆  Excellent EMC design.

◆  Low output harmonic distortion (THD≤3%).

◆  LED indicators for input voltage range, load power range, normal output & failure state.

◆  Optional energy saving mode.

◆  Extensive protections: reverse polarity, short-circuit, overload, under/over input voltage over-temperature, and inverter’s inner fault identification protections.

◆  Wide working temperature range (industrial level).

◆  Continuous operation at full power.


Application:

◆  For desolate area like mountain, island, pasturing area, etc.

◆  For transportation system like beacon light, traffic light, street light, etc.

◆  For communication system: unattached operation microwave middle station, optical cable maintenance station, etc.

◆  For solar power station, wind-solar power station, park charging station, family power house, factory power station, etc.

◆  For solar building: has good business future.

◆  For the new technology application project.


Technical Parameters

Model EEDNB10-48 EEDNB10-96 EEDNB10-110 EEDNB10-220
DC input Input   rated voltage 48   VDC 96   VDC 110   VDC 220   VDC
Input rated current 208   A 104   A 91   A 45.5   A
Input DC voltage allowing range 40-60   VDC 75-135   VDC 80-145   VDC 180-300   VDC
AC Bypass Allow   input voltage range 110   VAC / 120 VAC / 220 VAC / 240 VAC ± 15%
Input rated current 91A /   104A / 45.5 A / 42A
Bypass transfer time ≤4 ms
AC output Output   rated power 10KW
Output rated voltage and frequency 110   VAC / 120 VAC / 220 VAC / 240 VAC,50Hz / 60Hz
Output rated current 91A /   104A / 45.5 A /42A
Output voltage accuracy 110   VAC / 120 VAC / 220 VAC / 240 VAC± 2%
Output frequency accuracy 50Hz   / 60Hz ± 0.05%
Wave Pure   sine wave (Isolation transformer)
THD. ≤3%(Linear   load)
Power factor (PF) 0.8
Overload capacity 120%,3minutes,150%,10   second
Crest factor (CF) 3:01
Inverter efficiency >90%
Working Environment Dielectric   strength 1500VAC,1minute
Noise (1m) ≤50dB
Ambient temperature -10℃~+50℃
Humidity 0~90%,No   condensation
Altitude <3000m 
Higher than 3000m   rated power should be reduced
Production function Input   reverse protection, input under-voltage protection, output overload   protection, output short circuit protection, thermal protection
Size 560*780*950   mm
Weight 130   kg


Project Sample

On grid project sample 1On grid project sample 3

Product Inquiry
 24 hours of service

Contact us
Contact information

Quick Contact

Tel:  +86 577 61672337 
Phone:+86 13505876536
Email:  info@engelec.cn
 

Our Office

Street:No.138 Ninkang West Road, Yueqing, Zhejiang, China(325600) 
City:wenzhou

     

Other Ways

Skype:  jolininternational
wetchat: +86 135 0587 6536

     
 Copyright  2016 ENGELEC POWER TECHNOLOGY CO., LTD.  XML SiteMap