Professional manufacturer of vertical & horizontal wind turbine generator, PMG generator
 info@engelec.cn 
Home » Wind Turbine Controllers » Off-grid Controllers » EEB1 5000W PWM Wind/Solar Hybrid Controller Off-grid
Share to:

EEB1 5000W PWM Wind/Solar Hybrid Controller Off-grid

EEB1 5000W with two sets of control systems:PWM constant voltage system and three-phase dump load system. Big LCD shows real-time wind turbine voltage, current, power; solar panel voltage, current, power; battery group voltage, charge current.(The main board is with button battery, in case of power failure, history data can be saved for 30 days)

EEB1 5000W PWM Wind/Solar Hybrid Controller Off-grid


Off-grid Connection


Features


     ◆ The product is manufactured according the JB/T6939.1-2004 industrial standard and GB/T 19115.1-2003 national standard also with users’ technical requirements.

     ◆ Big LCD display. The images tell working state visually. Various data show: real-time wind turbine voltage, current, power; solar panel voltage, current, power; battery group voltage, charge current.(The main board is with button battery, in case of power failure, history data can be saved for 30 days)

     ◆ Two sets of control systems:PWM constant voltage system and three-phase dump load system.

     ◆ PWM constant voltage control is 120% of the rated power of the wind turbine. In case exceeding of PWM’s capacity, the three-phase dump load will automatically start immediately to ensure safe running of the overall wind turbine system.

     ◆ When the strong or super-strong wind conditions PWM control to ensure battery charged by the wind turbine with constant voltage and current.

     ◆ When the battery disconnect or damage, the three-phase dump load will start automatically to

  avoid the wind turbine idling and runaway accident.

     ◆ The protection function of battery: polarity reverse protection, disconnection and damage protection.

     ◆ Over-charging protection of the battery: When the battery is full (the battery voltage getting 125% of the rated voltage), the controller will carry out three-phase dump load automatically to stop charging the battery.

     ◆ Auto recharging of battery: When the battery voltage reduces to 108% of the rated voltage, it stops three-phase dump load to recharge battery automatically.

     ◆ The controller is equipped with manual three-phase dump load switch. To using this switch, the wind turbine will carry out three-phase dump load forcibly.

     ◆ The inside of the controller is equipped with surge arrester. Contain the over voltage into the wind turbine under the bearable voltage of the equipment or system. On the other way, to conduct the strong lightening current into the earth directly to avoid any damage of equipment.


Technical Parameters

Type 5KW-48Vdc 5KW-120Vdc 5KW-240Vdc
Wind turbine rated power 5KW 5KW 5KW
Wind turbine max. power 10KW 10KW 10KW
* Solar panel power 1.5KWp 1.5KWp 1.5KWp
Battery 48Vdc 120Vdc 240Vdc
Function  Rectifier,charge, control, *DC output
Automatic protection function Over   voltage protection, constant voltage charge, arrester
Manual function Manual   brake
Display mode LCD+LED
Display content Wind   turbine voltage, current, power; solar panel voltage, current, power; battery   voltage, charge current
PWM constant pressure voltage >58Vdc >145Vdc >290   Vdc
Wind turbine 3-phase dump load voltage 60±1Vdc 150±2Vdc 300±5Vdc
Wind turbine recharge voltage 54±1Vdc 135±2Vdc 280±5Vdc
*Solar control stop charging voltage 60±1Vdc 150±2Vdc 300±5Vdc
*Solar control recharge voltage 54±1Vdc 135±2Vdc 280±5Vdc
*Diesel generator starting voltage 40±1Vdc 100±2Vdc 200±5Vdc
*Diesel generator off voltage 54±1Vdc 135±2Vdc 270±5Vdc
Self-provided battery connecting wire  >20mm² >10mm² >6mm²
PWM fuse 125A 50A 32A
*Solar fuse 40A 16A 10A
Charging fuse 160A 63A 40A
Work environment temperature -30-60°C
Relative humidity <90% No condensation
Noise (1m) <40dB
Degree of protection IP20(Indoor)IP65 (Outdoors)
Cooling method Forced   air cooling
*Extral Control function (optional)  Yawing, variable pitch, mechanical   brake, hydraulic brake, electromagnetism brake 
*Communication interface (optional) RS485/USB/GPRS/WIFI/Ethernet
*Temperature compensation (optional) -4mv/°C/2V,-35°C~+80°C,Accuracy:±1°C
 Controller Size (mm)  Weight (kg)  580*400*240     23Kg 510*360*240      17Kg 510*360*240     17Kg
Dump load Size (mm)    Weight (kg) 600*450*380     28Kg 600*450*380      28Kg 600*450*380     28Kg


Project Sample

Installation

Product Inquiry
 24 hours of service

Contact us
Contact information

Quick Contact

Tel:  +86 577 61672337 
Phone:+86 13505876536
Email:  info@engelec.cn
 

Our Office

Street:No.138 Ninkang West Road, Yueqing, Zhejiang, China(325600) 
City:wenzhou

     

Other Ways

Skype:  jolininternational
wetchat: +86 135 0587 6536

     
 Copyright  2016 ENGELEC POWER TECHNOLOGY CO., LTD.  XML SiteMap