EESW 200W
ENGELEC
Availability: | |
---|---|
EESW Series 200W Intelligent Wind Turbine Controller
Applications
EESW series is wind power controller, and it can be applied to wind power generation system. It can control the wind turbine generation to charge the battery in a efficient and safe way.
Features
Ø Can be applied to independent wind power generation system and wind monitoring system.
Ø Integrated with other solar controller to be a wind&solar hybrid street light controller system.
Ø Simple structure, small volume, and cost effective.
Technical Parameters
Model | EESW02-12 |
Wind Turbine Input | |
Rated input power | 200W |
Rated input voltage | 14Vdc |
Input voltage range | 0~16Vdc |
Rated input current | 17Adc |
Wind turbine manual brake | Keep press the button for 5s to unload completely, and then recover by hand. |
Brake by over current | 17A (factory default,0~17A settable) unload completely when reached the set current, and recover automatically after working 10mins. |
Brake by overvoltage | Refer to “output overvoltage” control |
Charge Parameters | |
Rated battery voltage | 12V |
Temperature compensation function (optional) | -3mV/℃/2V |
Output Parameters | |
Rated output voltage | 12V |
Output overvoltage point | 14.5V (factory default,11Vdc~16Vdc settable) |
Output overvoltage recovery point | 13.2V (factory default, reduce 1.3V from the output overvoltage point) |
Max. Output current | 17A |
General Parameters | |
Rectifier mode | Uncontrolled rectifier |
Display mode | LED |
Monitoring Contents | Battery voltage, Brake status |
Lightning protection | YES |
Conversion efficiency | ≥95% |
Static loss | <0.5W |
Environment temperature | -20℃~+40℃ |
Humidity | 5%~95%,No condensing |
Noise | ≤65dB |
Cooling mode | Natural cooling |
Installation mode | Wall-mounted |
Cover protection class | IP53 |
Product dimension (W*H*D) | 105x120x49mm |
Product net weight | 0.8kg |
Note: the listed specs are just for your reference |
EESW Series 200W Intelligent Wind Turbine Controller
Applications
EESW series is wind power controller, and it can be applied to wind power generation system. It can control the wind turbine generation to charge the battery in a efficient and safe way.
Features
Ø Can be applied to independent wind power generation system and wind monitoring system.
Ø Integrated with other solar controller to be a wind&solar hybrid street light controller system.
Ø Simple structure, small volume, and cost effective.
Technical Parameters
Model | EESW02-12 |
Wind Turbine Input | |
Rated input power | 200W |
Rated input voltage | 14Vdc |
Input voltage range | 0~16Vdc |
Rated input current | 17Adc |
Wind turbine manual brake | Keep press the button for 5s to unload completely, and then recover by hand. |
Brake by over current | 17A (factory default,0~17A settable) unload completely when reached the set current, and recover automatically after working 10mins. |
Brake by overvoltage | Refer to “output overvoltage” control |
Charge Parameters | |
Rated battery voltage | 12V |
Temperature compensation function (optional) | -3mV/℃/2V |
Output Parameters | |
Rated output voltage | 12V |
Output overvoltage point | 14.5V (factory default,11Vdc~16Vdc settable) |
Output overvoltage recovery point | 13.2V (factory default, reduce 1.3V from the output overvoltage point) |
Max. Output current | 17A |
General Parameters | |
Rectifier mode | Uncontrolled rectifier |
Display mode | LED |
Monitoring Contents | Battery voltage, Brake status |
Lightning protection | YES |
Conversion efficiency | ≥95% |
Static loss | <0.5W |
Environment temperature | -20℃~+40℃ |
Humidity | 5%~95%,No condensing |
Noise | ≤65dB |
Cooling mode | Natural cooling |
Installation mode | Wall-mounted |
Cover protection class | IP53 |
Product dimension (W*H*D) | 105x120x49mm |
Product net weight | 0.8kg |
Note: the listed specs are just for your reference |