EESNB 5KW
ENGELEC
EESNB 5KW
Availability: | |
---|---|
EESNB 5KW Off-Grid Power Frequency Inverter Three phase
Features
◆ Complete isolation-type inverter technology, noiseless output.
◆ Adoption of advanced SPWM technology, pure sine wave output.
◆ Dynamic current loop control technology to ensure inverter reliable operation.
◆ Wide DC input voltage range.
◆ Excellent EMC design.
◆ Low output harmonic distortion (THD≤3%).
◆ LED indicators for input voltage range, load power range, normal output & failure state.
◆ Optional energy saving mode.
◆ Extensive protections: reverse polarity, short-circuit, overload, under/over input voltage over-temperature, and inverter’s inner fault identification protections.
◆ Wide working temperature range (industrial level).
◆ Continuous operation at full power.
Application:
◆ For desolate area like mountain, island, pasturing area, etc.
◆ For transportation system like beacon light, traffic light, street light, etc.
◆ For communication system: unattached operation microwave middle station, optical cable maintenance station, etc.
◆ For solar power station, wind-solar power station, park charging station, family power house, factory power station, etc.
◆ For solar building: has good business future.
◆ For the new technology application project.
Technical Parameters
Type | EESNB05-48 | EESNB05-96 | EESNB05-110 | EESNB05-220 | |
DC input | Input rated voltage | 48 VDC | 96 VDC | 110 VDC | 220 VDC |
Input rated current | 115.7 A | 57.9A | 50.5A | 25 A | |
Input DC voltage allowing range | 40-62 VDC | 80-124 VDC | 90-140 VDC | 180-280 VDC | |
AC input (AC bypass) | Allow input voltage range | 220 VAC / 380 VAC / 400 VAC± 15% VAC | |||
Input rated current | 15A / 7.5A / 7A | ||||
Bypass transfer time | ≤40 ms(4ms optional) | ||||
AC output | Output rated power | 5KVA | |||
Output rated voltage and frequency | 220 VAC / 380 VAC / 400 VAC,50Hz / 60Hz | ||||
Output rated current | 15A / 7.5A / 7A | ||||
Output voltage accuracy | 220 VAC / 380 VAC / 400 VAC ± 2% | ||||
Output frequency accuracy | 50Hz / 60Hz ± 0.05% | ||||
Wave | Pure sine wave (Isolation transformer) | ||||
THD. | ≤3%(Linear load) | ||||
Power factor (PF) | 0.8 | ||||
Overload capacity | 120%,10 minutes | ||||
Overcurrent capacity | 200%,10 seconds | ||||
Crest factor (CF) | 3:01 | ||||
Inverter efficiency | >90% | ||||
Working Environment | Dielectric strength | 1500VAC,1minute | |||
Noise (1m) | ≤50dB | ||||
Ambient temperature | -10℃~+50℃ | ||||
Humidity | 0~90%, No condensation | ||||
Altitude | <3000m | ||||
Higher than 3000m rated power should be reduced | |||||
Production function | Input reverse protection, input under-voltage protection, output overload protection, output short circuit protection, thermal protection | ||||
Communication interface | RS485/WIFI/GPRS/Ethernet (optional) | ||||
Pure Sine Wave | Yes | ||||
Equipped With Copper Transformer | Yes | ||||
Solar Charger | Optional | ||||
AC Charger | Optional | ||||
Generator Port | Optional | ||||
Size | 520*920*1050 mm | ||||
Weight | 135 kg |
Project Sample
EESNB 5KW Off-Grid Power Frequency Inverter Three phase
Features
◆ Complete isolation-type inverter technology, noiseless output.
◆ Adoption of advanced SPWM technology, pure sine wave output.
◆ Dynamic current loop control technology to ensure inverter reliable operation.
◆ Wide DC input voltage range.
◆ Excellent EMC design.
◆ Low output harmonic distortion (THD≤3%).
◆ LED indicators for input voltage range, load power range, normal output & failure state.
◆ Optional energy saving mode.
◆ Extensive protections: reverse polarity, short-circuit, overload, under/over input voltage over-temperature, and inverter’s inner fault identification protections.
◆ Wide working temperature range (industrial level).
◆ Continuous operation at full power.
Application:
◆ For desolate area like mountain, island, pasturing area, etc.
◆ For transportation system like beacon light, traffic light, street light, etc.
◆ For communication system: unattached operation microwave middle station, optical cable maintenance station, etc.
◆ For solar power station, wind-solar power station, park charging station, family power house, factory power station, etc.
◆ For solar building: has good business future.
◆ For the new technology application project.
Technical Parameters
Type | EESNB05-48 | EESNB05-96 | EESNB05-110 | EESNB05-220 | |
DC input | Input rated voltage | 48 VDC | 96 VDC | 110 VDC | 220 VDC |
Input rated current | 115.7 A | 57.9A | 50.5A | 25 A | |
Input DC voltage allowing range | 40-62 VDC | 80-124 VDC | 90-140 VDC | 180-280 VDC | |
AC input (AC bypass) | Allow input voltage range | 220 VAC / 380 VAC / 400 VAC± 15% VAC | |||
Input rated current | 15A / 7.5A / 7A | ||||
Bypass transfer time | ≤40 ms(4ms optional) | ||||
AC output | Output rated power | 5KVA | |||
Output rated voltage and frequency | 220 VAC / 380 VAC / 400 VAC,50Hz / 60Hz | ||||
Output rated current | 15A / 7.5A / 7A | ||||
Output voltage accuracy | 220 VAC / 380 VAC / 400 VAC ± 2% | ||||
Output frequency accuracy | 50Hz / 60Hz ± 0.05% | ||||
Wave | Pure sine wave (Isolation transformer) | ||||
THD. | ≤3%(Linear load) | ||||
Power factor (PF) | 0.8 | ||||
Overload capacity | 120%,10 minutes | ||||
Overcurrent capacity | 200%,10 seconds | ||||
Crest factor (CF) | 3:01 | ||||
Inverter efficiency | >90% | ||||
Working Environment | Dielectric strength | 1500VAC,1minute | |||
Noise (1m) | ≤50dB | ||||
Ambient temperature | -10℃~+50℃ | ||||
Humidity | 0~90%, No condensation | ||||
Altitude | <3000m | ||||
Higher than 3000m rated power should be reduced | |||||
Production function | Input reverse protection, input under-voltage protection, output overload protection, output short circuit protection, thermal protection | ||||
Communication interface | RS485/WIFI/GPRS/Ethernet (optional) | ||||
Pure Sine Wave | Yes | ||||
Equipped With Copper Transformer | Yes | ||||
Solar Charger | Optional | ||||
AC Charger | Optional | ||||
Generator Port | Optional | ||||
Size | 520*920*1050 mm | ||||
Weight | 135 kg |
Project Sample