Professional manufacturer of vertical & horizontal wind turbine generator, PMG generator
 info@engelec.cn 
Home » Wind Turbine Controllers » On-grid Controllers » EEGTY 15KW Yaw On-Grid Wind Turbine Controller

Product Center

loading

Share to:
sharethis sharing button

EEGTY 15KW Yaw On-Grid Wind Turbine Controller

EEGTY 15KW Yaw type controller with two sets of control systems:PWM constant voltage system and three-phase dump load system. Big LCD shows real-time wind turbine voltage, current, power; solar panel voltage, current, power; battery group voltage, charge current. With surge protector. When the strong or super-strong wind conditions, the controller can conduct constant voltage output to ensure the inverter safety running. EEGTY 15KW equipped with emergency stop switch. And solar power control system can be also added.
Availability:

EEGTY 15KW On-Grid Wind Turbine Controller


On grid connection


Features


  • The product is manufactured according the JB/T6939.1-2004 industrial standard and GB/T 19115.1-2003 national standard also with users' technical requirements.

  • Big LCD display. The images tell working state visually. Various data show: real-time wind turbine voltage, current, solar panel voltage, current, DC output voltage, current, total power generation(The main board is with button battery, in case of power failure, history data can be saved for 30 days).

  • Two sets of control systems:PWM constant voltage system and three-phase dump load system.

  • PWM constant voltage control is 120% of the rated power of the wind turbine. In case exceeding of PWM’s capacity, the three-phase dump load will automatically start immediately. After 10-20 minutes, the three-phase dump load will stop and the wind turbine will re-start to resume power supply to ensure the safe running of the overall wind turbine generation system.

  • When the strong or super-strong wind conditions, the controller can conduct constant voltage output to ensure the inverter safety running.

  • When the condition of disconnected grid-connected inverter, the controller can conduct constant voltage output and wait for inverter resumption.

  • When the grid is cut off, the three-phase dump load of the controller will automatically start to work and the inverter will stop output to grid. When the grid resuming, the controller stops three-phase dump load and the inverter will resume power supply.

  • The inside of the controller is equipped with surge protector. Contain the over voltage into the wind turbine under the bearable voltage of the equipment or system. On another way, to conduct the strong lightening current into the earth directly to avoid any damage of equipment.

  • he controller is equipped with emergency stop switch; in case of emergency, press down the emergency stop button in the front panel to cut off all power supply of the controller and the wind turbine will immediately brake(three-phase dump load).

  • The controller is equipped with manual three-phase dump load switch. To using this switch, the wind turbine will brake (three-phase dump load).


Optional Functions:

  • Adopt Modbus Communication protocol. Convenient to carry out the secondary development.

  • Adjusting the technical specification via RS485 is available. Convenient to adjust the different wind turbines for professional customers.

  • Support WIFI and GPRS. Customers can monitor the real-time working state of the on grid wind power system via PC and mobile and query history working sate. Both Android and OS are compatible in Mobile.

  • Can increase the solar panel control system according to customer requirements.

  • For the different wind turbine, the controller can be equipped with mechanical yawing, rotate tail control, furled empennage, mechanical brake, hydraulic brake, electromagnetism brake and other brake functions.


Technical Parameters

Type EEGTY-15KW
Wind turbine rated power 15KW
Wind turbine Max. power 30KW
Wind turbine rated voltage AC380V-400V
Function Rectifier,control,   DC output
Automatic protection function Over   voltage protection, network electric cut off protection, regulated supply   output, arrester,  reset, emergency   switch,Yaw control, change   OARS
Manual function Manual   brake
Display mode LCD
Display content Wind   turbine voltage, current, power; Solar voltage, current, power; DC output   voltage, DC output current, DC output power, total power.
PWM constant voltage ≥550dc
Wind turbine deflection 45°(adjustable) ≥550dc
wind turbine 3-phase dump load voltage1 580±5Vdc
Wind turbine deflection 90°(adjustable) 580±5Vdc
Time-lapse of the wind turbine 3-phase dump load2 12-20   min
PWM dump load fuse 50A
Fuse of DC output 63A
Wind speed(adjustable) ≥2m/s
Wind direction(adjustable) 0-360°
Work environment temperature -30-60°C
Relative humidity <90% No condensation
Noise (1m) <40dB
Degree of protection IP20(Indoor)  IP65 (Outdoors)
Cooling method Forced   air cooling
*Communication interface (optional) RS485/USB/GPRS/WIFI/Ethernet
*Temperature compensation(optional) -4mv/°C/2V,-35°C~+80°C,Accuracy:±1°C
Size of the controller (mm) 600*550*1220mm
Weight of the controller 80KG
Size of the dump load (mm) 690*450*530
Weight of the dump load 41Kg


Optional APP function:


中性APP_看图王


Project Sample

On grid project sample 1


On grid project sample 2

On grid project sample 3

Previous: 
Next: 
Product Inquiry
 24 hours of service
Contact us
Contact information

Quick Contact

Tel:  +86 577 61672337 
Phone:+86 13505876536
Email:  info@engelec.cn
 

Our Office

Street:No.138 Ninkang West Road, Yueqing, Zhejiang, China(325600) 
City:wenzhou

     

Other Ways

Skype:  jolininternational
wetchat: +86 135 0587 6536

     
 Copyright  2016 ENGELEC POWER TECHNOLOGY CO., LTD.  XML SiteMap
We use cookies to enable all functionalities for best performance during your visit and to improve our services by giving us some insight into how the website is being used. Continued use of our website without having changed your browser settings confirms your acceptance of these cookies. For details please see our privacy policy.
×